I took advantage of a few cool hours in the early mornings recently to rough out the seats. The saddling will be further refined once I’ve turned the stretchers and legs and glued them in place.
I also made the ash crest rails and scratched a bead along their bottom edges.
Fig. 1. The six crest rails…
Fig. 2. … and 1/4″ bead.
Jack Plane
Advertisements
Jack, Am I guessing correctly that the curve on the crest rails is sawn or have I missed an episode on bending ash? Dennis
LikeLike
Sorry, I should have been clearer. The crest rails are indeed sawn, tapering from 1-1/8″ thick at the bottom to 7/8″ at the top.
JP
LikeLike